Ganz ZC-L1000 Serie Manual De Instrucciones página 5

INSTALLATION & ADJUSTMENT
Mounting The Camera
1
Mount the camera with the bracket on a wall or a ceiling.
Power Supply Cable Connection
2
12V DC: Connect power supply cable to the power input terminal. In case of 12VDC,
24V AC: Connect power supply cable to the power input terminal. In case of 24VAC
Adjustment of View Angle and Focus
3
Take the lens hood off by turning
it counter-clockwise.
Ceiling Mount
make sure of the proper polarity. Improper polarity may cause damage to
the camera.
60Hz, Line Lock mode can be selected by DIP switch in order to synchro-
nize the picture to the AC power supply.
Adjust view angle and focus by
turning the levers. Then tighten
the lock screws.
EG-5
Wall Mount
Align the markings on the lens
hood and camera body. Then turn
the hood clockwise to lock.