Ganz ZC-L1000 Serie Manual De Instrucciones página 6

DIP Switch Set Up
4
Set according to lighting conditions.
Attention: DO NOT change "FIX" switch position from the factory setting.
ZC-L1210NHA (Color)
1
2
3
Factory Setting
4
ZC-L1210EHA (Black & White)
1
2
Factory Setting
3
4
FIX Do not change the switch position from the factory setting.
ON Shutter speed to be fixed at 1/100.
Flickerless
(FL)
OFF Normal position
Set to this position when a strong light is in the
Back Light
ON
back ground.
Compensation
(BLC)
OFF Normal position
INT Internal synchronization mode
Synchronization
Mode
L.L. Line lock mode (24VAC, 60Hz only)
FIX Do not change the switch position from the factory setting.
OFF Gain level to be fixed at 4dB.
Auto Gain Control Set to this position to improve camera
ON
(AGC) sensitivity in low light conditions.
Gain level varies from 4dB to 22dB.
Set to this position when a strong light is in the
Back Light
ON
back ground.
Compensation
(BLC)
OFF Normal position
INT Internal synchronization mode
Synchronization
Mode
L.L. Line lock mode (24VAC, 60Hz only)
EG-6