Ending Operation Of The Laminator - HP Pro Laminator 600 A4 Manual De Instrucciones

Î The laminating pouch is drawn in and discharged on the output side (front) of the lamina-
tor.
Caution!
Risk of burns through hot laminating pouch.
When the laminating pouch is ejected after lamination, it is extremely hot. Only remove
the ejected lamination pouch holding it at the cooled end.
4 Remove the laminating pouch from the laminator.
5
Press the button (9) to switch the laminator off.
Î The lamination process has been completed.
If you no longer need to use the laminator, switch the power switch (4) to OFF.
Caution!
Risk of burns through hot machine surface!
Wait a few minutes after switching off until the laminator has cooled down before you
touch it.

Ending Operation of the Laminator

Switch the laminator off when you want to stop using the laminator.
1 Switch the power switch (4) to OFF.
2 Disconnect the power plug from the power socket.
3 Disconnect the power cable from the socket.
4 Fold the pouch tray (1) back up.
Î Operation of the laminator has been ended.
A3 A4 A5 A6 A6 A5
- 21 -
A4 A3
75MIC
125MIC
80MIC
CAUTION HOT
EN