INSTRUCTIONS FOR SAFETY GLASSES
EN
WARNING:
No safety glasses or other
protectors can provide 100% protection
against injury. The safety glasses shall
only be used as additional protection from
accidental injury. The improper operation
of any power tool may result in serious
and permanent injury to the operators (e.g.
blindness, etc.). Therefore, please follow your
local safety regulations and the instructions
in the operator's manual. Please read the
following safety recommendations carefully.
WARNING:
Do not use once allergy is
noticed. Materials used for this protector
with low irritability, but could cause allergic
reactions to susceptible individuals.
1. Marking
MARKING
F
2C-1.2/2-1.2 for GS001E
5-3.1 for GS002E
2C-1.2 for GS003E
2. Storage
Store in a clean and dry area.
3. Clean
Clean lens with a soft cloth or soap and water
for better visibility.
4. Maintenance
Always inspect glasses before use. Damaged
frames or glasses reduce protection and must
be replaced immediately. The glasses must
be replaced every two years at the latest.
2
Safety glasses — GS001E/GS002E/GS003E
5. Protection scope
Protective eyewear provides protection from
light impact hazard.
WARNING:
against mist, sprays or splashes.
WARNING:
cutting or welding with torches or electric
(arc) welding. This protector is not intended
for use with infrared radiation.
WARNING:
against severe impact hazards, such as
fragmenting grinding wheels, abrasive discs
or explosive devices.
WARNING:
simulated combat games.
6. Usage
DESIGNATION
Ensure a secure and comfortable fit.
CE
WARNING:
Mechanical
over standard ophthalmic spectacles.
strength grade
WARNING:
resistant but not unbreakable. Do not use if
Filter Scale
lens becomes pitted, cracked or scratched.
Please visit the website egopowerplus.com for
full terms and conditions of the EGO warranty
policy.
Original instructions
Do not use for protection
Do not use for burning,
Do not use for protection
Do not use for sports or
Do not wear this protector
These lenses are impact-