Battery Safety; Declaration Of Conformity; Maintenance And Care - Stanley STHT1-77366 Manual De Instrucciones

Battery Safety

WARNING:
Batteries can explode or leak and can cause personal injury
or fire. To reduce this risk:
DO NOT splash or immerse in water or other liquids.
DO NOT store or use in locations where the temperature may reach
or exceed 105 °F (40.5 °C) (such as outside sheds or metal buildings
in summer). For best life store in a cool, dry location.
DO NOT incinerate even if severely damaged or completely worn
out. The battery can explode in a fire. Toxic fumes and materials are
created when lithium ion batteries are burned.
• If battery contents come into contact with the skin, immediately
wash area with mild soap and water. If battery liquid gets into the
eye, rinse water over the open eye for 15 minutes or until irritation
ceases. If medical attention is needed, the battery electrolyte is
composed of liquid organic carbonates and lithium salts.
• Contents of opened battery may cause respiratory irritation.
Provide fresh air. If symptoms persist, seek medical attention.
• Burn hazard. Battery liquid may be flammable if exposed to spark
or flame.
• Fire hazard. Never attempt to open for any reason. If the housing
is cracked or damaged, do not charge. Do not crush, drop or
damage. Do not use if it has received a sharp blow, been dropped,
run over or damaged in any way (e.g. pierced with a nail, hit with
a hammer, stepped on). Damaged devices should be recycled.
DO NOT charge the battery pack in an air temperature below
+40 °F (+4.5 °C), or above +105 °F (+40.5 °C). Longest life and
best performance can be obtained if the battery pack is charged
when the air temperature is between 65 °F –75 °F (18° and 24 °C).
• Never use any charger or cable that is damaged, as it may present
a risk of fire, explosion, leakage, or other hazard.
End of Life
DO NOT dispose of this product with household waste.
PLEASE RECYCLE in line with local provisions for the collection and
disposal of electrical and electronic waste.

Declaration of Conformity

This product conforms with IEC60825-1:2014 (3
For further details please refer to www.stanleyworks.com.

Maintenance and Care

DO NOT allow to get wet. Damage to internal circuits may result.
Laser tool is not waterproof.
DO NOT leave laser tool in direct sunlight or expose it to high
temperatures. The housing and some internal parts are polymeric
materials and may become deformed at high temperatures.
DO NOT store the laser tool in a cold environment. Moisture may
form on interior parts when warming up. This moisture could fog up
laser windows and / or cause corrosion of internal circuit boards.
NOTE: When working in dusty locations, some dirt may collect on
the laser window. Remove any moisture or dirt with a soft, dry cloth.
DO NOT use aggressive cleaning agents or solvents.
NOTE: This product is intended to be powered by a UL Listed power
supply; output rated 5 Vdc, 0.35 A.
Warranty
1-YEAR WARRANTY
Stanley warrants its electronic measuring tools against deficiencies
in materials and / or workmanship for one year from date of
purchase.
Deficient products will be repaired or replaced, at Stanley's option, if
sent together with proof of purchase to:
Stanley Black & Decker
210 Bath Road
Slough, Berkshire SL1 3YD
UK
Subject to change without notice
Edition).
rd
3