Thinkware sports M1 Seguridad, Garantía Y Guía De Inicio Rápido página 11

Connecting the camera cable
2
1
2
1
2
Attach the camera to the mount as
indicated by the horizontal reference
point, and firmly tighten the screws using
a wrench.
Tighten the bolts firmly to fix the
front/rear camera to the mount. The
camera may become detached from
the mount while driving if the screws
are not firmly tightened.
To adjust the angle of the front/rear
camera, appropriately tighten the
screws attached to the mount.
Insert the camera cable into the camera
port by lining up the guide marks (
the camera cable and the port. Rotate the
port clockwise until it is tight to secure the
connection.
To disconnect the camera cable
from the camera port, rotate the port
counterclockwise until it is loose, and then
pull the connectors apart.
For safe driving, arrange the cables to
prevent the driver's vision from being
obstructed or from interfering with
driving.
9
) on