Product overview
Ensure that all the items are included in the product box when you open it. The standard items
may change without prior notice.
Main unit/integrated remote control
(power cable included)
Mount
Check the thickness of each cable to identify the front camera and the rear camera. The front
camera cable is thicker than the rear camera cable.
Removing and inserting the memory card
• Ensure that the product is turned off before removing the memory card. The recorded video files
may be corrupted or lost if you remove the memory card while the product is on.
• Ensure that the memory card is in the correct direction before inserting it into the product. The
memory card slot or the memory card may be damaged if it is inserted incorrectly.
• Use only authentic memory cards from THINKWARE. THINKWARE does not warrant the
compatibility and normal operation of third-party memory cards.
• The memory card is covered by warranty against malfunctions for 6 (six) months from the
purchase date. If the memory card fails to work after the warranty period, purchase a new one
from THINKWARE or its authorized retailers.
• To prevent loss of recorded video files, periodically back up the video files on a separate
storage device.
• For the best recording performance, format the memory card quarterly.
Front camera
Quick start guide & Warranty /
CS information
Removing the memory card
1
Ensure that the product is turned off, and then gently push
the memory card into the slot with the tip of your finger.
The memory card will be partially ejected from the product.
2
Remove it from the product.
Inserting the memory card
Insert the memory card into the memory card slot, paying
attention to the direction of the memory card, and then push
the memory card into the slot until you hear a click. Before
inserting the memory card, ensure that the metal contacts on
the memory card are facing toward the buttons of the product.
5
Rear camera
microSD memory card