Display Items; Repeat And Shuffle Play; Support Site; Playing Back Ipod - Sony CDX-GT540UI Manual De Instrucciones

• This unit cannot recognize USB devices via a USB
hub.

Display items

A Source
B Track name, Artist name, Album number*,
Album name, Track number/Elapsed playing
time, Clock
* Album number is displayed only when the album is
changed.
To change display items B, press (DSPL).
Notes
• Displayed items will differ, depending on the USB
device, recorded format and settings. For details,
visit the support site.
• The maximum number of displayable data is as
follows.
– folders (albums): 128
– files (tracks) per folder: 500
• Do not leave a USB device in a parked car, as
malfunction may result.
• It may take time for playback to begin, depending on
the amount of recorded data.
• DRM (Digital Rights Management) files may not be
played.
• During playback or fast-forward/reverse of a VBR
(Variable Bit Rate) MP3/WMA/AAC file, elapsed
playing time may not display accurately.
• Playback of the following MP3/WMA/AAC files is not
supported.
– lossless compression
– copyright-protected

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM
SHUF ALBUM
SHUF DEVICE
After 3 seconds, the setting is complete.
To return to normal play mode, select "
or "SHUF OFF. "
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
OFF"
iPod
For details on the compatibility of your iPod, see
"About iPod" on page 20 or visit the support site.
In these Operating Instructions, "iPod" is used as
a general reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text or illustrations.

Support site

http://esupport.sony.com
http://www.xplodsony.com/

Playing back iPod

Before connecting the iPod, turn down the
volume of the unit.
1
Connect the iPod to the USB
connector via the dock connector to
USB cable.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.*
Tip
We recommend the RC-100IP USB cable (not
supplied) to connect the dock connector.
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press (SOURCE/OFF) repeatedly
until "USB" appears. ("IPD" appears in the
display when iPod is recognized.)
* In the case of an iPod touch or iPhone being
connected, or that the iPod was last played back
using passenger control, the logo will not appear on
the screen.
continue to next page t
15