How To Operate - IndoorCycling Group ANT+ CONSOLE Manual Del Usuario

HOW TO OPERATE

RESET USER DATA:
Press "FLOW" button for 3 seconds to reset all
currently stored user data such as time, distance
and Kcal, average HR and RPM.
ENGAGE LIGHT FUNCTION:
Pressing the "SUN" botton briefly during exercise,
turns on the display illumination for 5 seconds.
TRAINING INFO:
Select your desired training information displayed
on the lower part of the ANT+ console LCD by
operating the "FLOW" button briefly during
exercise. The display will shift from Time, to
Distance, to Kcal and finally to Scan.
If you select the scan mode the display will
alternate between Time, Distance, Kcal.
320-00-00001-01-v1.2 | Copyright by Indoorcycling Group GmbH 2014 | www.indoorcycling.com