Preparation For Use; Handling; Error Messages; Technical Data - ADE Franca Manual De Instrucciones

Thank you for your decision to purchase this high quality product of ADE Germany. You
bought a scale featuring highest technical standard and well-proven quality. Please read
this instruction manual prior to the start up and keep it careful to have this information on
hand whenever needed.
1.

Preparation for use

Activate / Replace batteries:
Open the battery cover at the bottom side of the scale and
remove the battery safety strip. Please ensure the correct
polarity of the battery (+/-).
To replace the battery open the battery cover. Move the battery at the recess
downwards and the battery will be easy to take out. Make sure that you do not bend the
contact. Insert the new battery (1 x CR2032) and close the battery cover.
Safety guideline s:
Please care that no heavy object may fall on the scale.
Otherwise, the scale may become damage.
Clean the scale only by using a slightly damp cloth. Do not use
solvents or abrasive cleaning agents. Do not submerge the
scale under water. All plastic parts of the scale should been
cleaned immediately after contact with fat, spices, vinegar and
other heavily spiced or coloured food. Avoid contact with citric
acid.
To remove the measuring cup (e.g. for cleaning) push the pushbutton below the handle
and remove the measuring cup.

2. Handling

Switch-on the sca le:
To switch-on the scale push the ON/OFF/TARE-button. At first, the LCD display will
show for a few seconds the characters " 8888" and after the scale leveled off, the
indication will be " 0 g" . Now the scale is ready to use.
Units of weight:
By pushing the UNIT/HOLD-button it is possible to change the unit of weight for country
specific setting (g = gram / lb:oz = pound ounce / ml = millilitre / fl.oz = fluid ounce).
Please pay attention to use the scale under consideration of your country specific unit of
weight.
2
Weighing:
Switch-on the scale. After the 0 g indication is stable put the weighing charge into the
measuring cup. After stabilisation of the weight indication, the weight is readable in the
display.
Hold-func tion:
By pushing the UNIT/HOLD-button, while the weight indication is stable you can hold the
reading. When Hold-function is active, the symbol " H" appears in the display. To
deactivate the Hold-function push the UNIT/HOLD-button again.
Tare-func tion:
Use the ON/OFF/TARE-button to set the scale to " 0 g" . Put the weighing charge into the
measuring cup. Upon the weight is indicated and stable push the ON/OFF/TARE-button
to set the indication again to zero. This process is repeatable until the max. capacity of the
scale (3 kg) has been reached. After removal of the loading, the display indicates the total
weight as negative reading. Please take care not to move the weighing platform during the
tare procedure.
Automatic switch-off the sca le:
If the indicated weight does not change within 90 seconds, the scale will automatically
switch-off. To save the battery you can switch-off the scale manually by pushing the
ON/OFF/TARE-button for about 2 seconds.

3. Error Messages

" LO" = Battery is used up - Please replace the battery with the intended
type (1 x CR2032).
" Err" = Overload - The weight exceeds the maximum capacity of 3 kg.
Please immediately remove the critical load to avoid load cell
damage.

4. Technical Data

Capacity x graduation: max. 3 kg x 1 g
Max. volume measuring cup: 1 litre
Dimensions: 195 mm x 147 mm x 130 mm
Battery: 1 x CR2032 (included)
Subject to technical modifications

5. Warranty

ADE warrants for a period of 3 years from the date of purchase that it will remedy any
defects due to faulty material or workmanship free of charge by repair or replacement.
When making a guarantee claim, please return the weighing scale together with the sales
slip including the reason of complaint to your dealer.
3