Floureon XF-388 Manual Del Usuario página 10

8. Monitor
You can use the monitor feature to check for weaker signals in the
current channel.
• Press and hold the MON-button to activate channel monitoring.
• Release the MON-button to stop channel monitoring. Note:During
channel monitoring the receiver circuit in the Radio's will not listen to
CTCSS codes.
9. VOX Selection
The Radio's is capable of voice activated (VOX) transmission. In VOX
mode, the radio will transmit a signal when it is activated by your voice
or other sound around you. VOX operation is not recommended if you
plan to use your radio in a noisy or windy environment.
Note: VOX mode will be overrided when you press the TALK - button
"15" .
• Press the MENU- button(11) three times, the current VOX setting
flashes on the display and the VOX icon is displayed.
• Press -button(4) to set the VOX sensitivity level between 1 and 3
(level 3 is the most sensitive level).
• Press -button(7) until "OF" appears on the display,to turn VOX
OFF.
• Press the TALK-button(15) to confirm and return to stand-by mode.
10. Scanning for an active radio channel
• Press the SCAN -button(21) : The 'Scan' function indicator (17) will
appear on the screen and the channel (18) will scan continuously
from 1 to 8/20/22.
• Press the
Once an active channel is found, the scanning will stop and you can
listen to the transmission.
When the transmission on the found channel stops, the scanning will
resume automatically.
-button(7) to start the channel scan from 8/20/22 to 1.
EN-7