Bosch GOP 12V-28 Professional Manual Original página 19

Application tool
AIZ 32 BSPB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
AIZ 32 AT/
AIZ 32 AIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for metal
AIZ 32 APT/
AIZ 32 APIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for
multi-material
AYZ 53 BPB
Starlock
53 × 40 mm
plunge cut saw
blade for multi-
material
AII 65 APB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
ACZ 85 EB
Starlock
85 mm diameter
bimetal segment
saw blade for wood
and metal
ACZ 100 SWB
Starlock
100 mm diameter
bimetal segment
serrated knife for
multi-material
ACZ 105 ET
Starlock
105 mm diameter
carbide segment
saw blade for
multi-material
Bosch Power Tools
Material Application
profiles with small dimen-
sions
Hardwood, laminated Splinter-free separation and plunge cuts in coated boards
boards or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
Hard ferrous metals, ex- Sawing extremely abrasive materials or hard ferrous
tremely abrasive materi- metals; long service life thanks to BOSCH carbide techno-
als, fibreglass, plaster- logy;
board, cement-bonded Example: Cutting of kitchen front covers, simple sawing
fibreboards, hardened through hardened nails and stainless steel
nails and screws
Hard ferrous sheet metal, Splinter-free separating cuts and plunge cuts in sheet
epoxy, plasterboard, metal thanks to round sawing edge (Curved-Tec); long ser-
GFRP, CFRP, cement vice life thanks to BOSCH carbide technology;
fibreboard Example: Sawing through sheet metal, cutting through
screws in window frames
Gypsum boards, chip- Optimised for plunge saw cuts with a subsequent longer
boards, sandwich mater- separation cut; the Dual-Tec shape ensures a clean and
ial, wood complete cut both in the corners and during a longer sep-
aration cut;
Example: Plug socket recesses in gypsum boards or
wooden walls
Softwood, hardwood, Splinter-free separation and plunge cuts thanks to round
veneered boards, plastic- sawing edge (Curved-Tec) in coated boards or hardwood;
coated boards, non- Example: Shortening door frames, recesses in laminate
hardened nails and bolts flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
Wooden materials, Separation and plunge saw cuts;
plastic, soft and non-fer- also for sawing close to the edge in difficult-to-access
rous metals areas;
Example: Shortening already installed skirting boards or
door frames, plunge cuts when adapting floor panels
Insulation material, insula- Precise cutting of soft materials;
tion boards, floor panels, example: Cutting insulation boards to size, cutting pro-
impact sound insulation truding insulation material to length so that it is flush with
boards, cardboard, car- the surface
pets, rubber, leather
Fibre cement boards, tile Separation and plunge saw cuts; also for sawing close to
joints, brick, fibreglass-re- the edge in difficult-to-access areas; long service life
inforced plastics, lamin- thanks to BOSCH carbide technology;
ate Example: Shortening already installed skirting boards or
door frames, milling cable ducts in brick, quick and low-
dust cutting out of tile joints, cutting fibreglass boards to
size for fittings, adjustment work in laminate; available
from mid-2021
English | 19
1 609 92A 5V6 | (20.08.2020)