Introduction; General Data; Technical Data; How To Use - Fenix TF-2 Instrucciones

1. INTRODUCTION

The instruction manual is an integral part
of the stage platform to be consulted before,
during and after platform's start-up, likewise
whenever deemed necessary, respecting the
contents for each and all the parts thereof.
This is the only way to achieve the basic
objectives established in the manual's base
such as preventing accident risks and the
maximum possible optimization for the stage
platform features.
This manual has taken extreme care regarding
safety and accident prevention at work while
using the stage platforms, highlighting
information of particular interest to the user.
ATTENTION: BEFORE TO USING
THE STAGE PLATFORM, READ THIS
MANUAL CAREFULLY

2. GENERAL DATA

2.1. Technical Data:

Name: STAGE PLATFORM
Model: TF-2 (MT-2 + PT)
TF-4 (MT-4 + PT)
Technical characteristics:
Maximum height: 2m.
Maximum load: 1.000 kg/m² uniformly
distributed.
Material:
Panel: 21mm phenolic plywood, with
non-slip engraving and sealed edges.
Frame: Aluminium alloy 6005-T6.
Base area:
MT-2: 1x1m.
MT-4: 2x1m.
Weight:
MT-2: 26kg.
MFT-4: 44kg.
Leg anchorage (PT) with fitting knob.
Equipment description:
Stage Platforms MT-2 + PT and MT-4 +
PT have been designed to be used as stage
platform.
Tested by skilled personnel having passed all
the operating, maximum load and dimension
inspections.
Company: FENIX Stage, S.L.
Address: Avda. de los Trabajadores, 24
Horno de Alcedo - 46026 - Valencia (Spain)

3. HOW TO USE

1. Place the frame of the platform (MT) in
a horizontal or vertical position with the leg
compartment upwards.
2. Insert the legs (L) in their location (A) and
attach them with the star-knob (K).
3. Turn around the platform with the legs
attached and place it in its working position.
4. In case of using telescopic legs (PT)
it is advised to set the height of the legs
before placing the platform in its working
position,to do so remove the safety pin (P)
and select the desired height, then place the
pin back in its corresponding hole and put
back its butterfly nut (TP1). To select a more
accurate height or to level the stage platform,
there is a threaded stabilizer with polyamide
plate (E) adjustable by millimeter.
5. Once the stage platforms are in its working
position together with others stage platforms,
they must be joined together with the piece
(SU-MT). In order to do so, first be sure that
the stage platforms are all settled at the same
height, then unscrew the butterfly nut which
connects the two halves, place each half in
the inner rail (R) of the frame of the platform
and connect the two halves again with the
butterfly nut (TP2) applying enough strain so
that the two stage platforms stay completely
stuck together.
6. For the process of dismantling and folding,
reverse the order of the steps.
ENGLISH
9 9