Thank You For Choosing Sterling
We appreciate your commitment to Sterling value. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers are listed on the back cover.
Thanks again for choosing Sterling.
Tools and Materials
Sealant
Tape Measure
Pipe
Keyhole/Compass Saw
Wrench
or Sabre Saw
Before You Begin
WARNING: Risk of personal injury. Metal surfaces are sharp
and can cause severe cuts. Use gloves and handle the sink
edges carefully.
Observe all local plumbing codes.
Shut off the hot and cold water supplies.
Unpack the new sink and carefully inspect for damage.
Verify that all included materials are present.
Included Materials
• (1) Stainless Steel Sink
• (1) Installation Guide
Return the sink to its carton until it is time to install it.
Illustrations shown may not represent your actual product.
1014305-2-F
Putty
Plumbers
Pencil
Knife
Putty
Ratchet with Deep
Socket or 5/16" Nut
Driver with Hollow Shaft
2
Safety
Glasses
Drill
Sterling