Treatment Steps; After Treatment; Maintenance - Home Skinovations H4201 Manual Del Usuario

7.2 Treatment steps

1. Make sure your skin is clean, dry and free from powder, cream or gel.
2. Make sure that the rubber cap (#2), filter (#3), and treatment tip (#1) are
3. Press the control button (#4) to turn on the device. Your Silk' n Reveal is
4. Apply the treatment tip firmly to your skin so that you feel the suction.
5. Work each area as recommended in section "6.1 Treatment areas".
6. To move from low to high suction mode, press the control button
7. To switch off the device after treatment, short press the control button
8. Unplug the device and store it in its original box. Please refer to section

7.3 After treatment

8. Maintenance

It is important to clean your Silk' n Reveal device and store it properly after each
treatment.
L
L
evit Reveal UM NA 2289A inside ED98-07 release.indd 11
firmly in place. For your first few treatments, be sure to use the Fine
treatment tip.
ready for use in low suction mode.
again.
once or twice, depending on which suction mode you are in.
"8. Maintenance".
Try not to expose recently treated areas of skin to sunlight. Be sure to
apply sunscreen SPF 30 or higher when out in the sun.
You may wish to apply a facial mask, or apply a day or night cream.
First, unplug the device.
To clean the device, wipe with a clean, dry cloth. Never use
acetone or other abrasive fluids, because they will damage
your device.
11
EN
1/19/2017 11:46:14