Change Settings - Motorola TZ700 Guia De Inicio Rapido

English

Change settings

Press and hold
on/off these features:
• Reset to factory default
Caution: This action erases all pairing information stored in your car kit.
• Voice prompts
• Caller ID
• Multipoint (two phone) connections
Follow the voice prompts to make changes to these settings.
Problems?
My car kit will not enter pairing mode.
Make sure that any devices previously paired with the car kit are turned off.
If the status light is flashing in blue, first turn off the other device, then turn
the car kit off and on. The status light becomes steadily lit in blue and you
hear "ready to pair".
My phone doesn't find my car kit when searching.
Make sure the status light on your car kit is steadily lit in blue when your
phone is searching for devices. If not, turn off the car kit and press and hold
while turning on again and follow the voice prompts to reset the car kit to
factory default condition. The car kit resets and you hear "ready to pair" and
see the status light steadily lit in blue.
10
while turning on your car kit to set language and turn