Operating Your Fan 9 - HAMPTON BAY Minorca Manual Del Propietário

Remote Control - Your fan is equipped with a
remote control to operate the speed and lights
of your new ceiling fan. For more information
on how to install the remote control, see the re-
mote control instruction along with the remote
control components.
Speed settings for warm or cool weather depend
on factor such as the room size, ceiling height,
number of fans and so on.
The fan shipped from the factory with the re-
versing switch positioned to circulate air down-
ward. If airflow is desired in the opposite direc-
tion, turn your fan off and wait for the blades
to stop turning, then slide the reversing switch
(located at the top of the motor housing, refer to
figure 10 on page 5) to opposite position, and
turn fan on again. The fan blades will turn in the
opposite direction and reverse the airflow.
1. Speed - The remote features Low, Med, Hi
and Off buttons to select the desired speed
of operation and turn the fan On or Off.
2. Lights - To control the light kit, the remote
features a light/Dimmer button.
WAIT FOR FAN TO STOP BEFORE REVERSING
THE DIRECTION OF BLADE ROTATION.
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in Fig-
ure 14. This allows you to set your air condi-
tioner on a higher setting without affecting your
comfort.
Cool weather - (Reverse) An upward air flow
moves warm air off the ceiling are as shown in
Figure 15. This allows you to set your heating
unit on a lower setting without affecting your
comfort.

Operating Your Fan 9.

Figure 14
Figure 15