UK
Agility Wireless
Tel: +44-161-655-5500
2-Way Remote Control
technical@riscogroup.co.uk
U.S.A
Tel: +1-631-719-4400
support-usa@riscogroup.com
ITALY
Tel: +39-02-66590054
support@riscogroup.it
BRAZIL
Tel: +1-866-969-5111
support-br@riscogroup.com
SPAIN
Tel: +34-91-490-2133
support-es@riscogroup.com
RISCO Group Limited Warranty
RISCO Group and its subsidiaries and af liates ("Seller") warrants its products to be free from defects in
materials and workmanship under normal use for 24 months from the date of production. Because Seller
does not install or connect the product and because the product may be used in conjunction with products
not manufactured by the Seller, Seller cannot guarantee the performance of the security system which uses
this product. Seller's obligation and liability under this warranty is expressly limited to repairing and replacing,
at Seller's option, within a reasonable time after the date of delivery, any product not meeting the speci cations.
Seller makes no other warranty, expressed or implied, and makes no warranty of merchantability or of tness
for any particular purpose.In no case shall seller be liable for any consequential or incidental damages for breach
of this or any other warranty, expressed or implied, or upon any other basis of liability whatsoever. Seller's
obligation under this warranty shall not include any transportation charges or costs of installation or any liability
for direct, indirect, or consequential damages or delay. Seller does not represent that its product may not be
compromised or circumvented; that the product will prevent any personal injury or property loss by burglary,
robbery, re or otherwise; or that the product will in all cases provide adequate warning or protection. Buyer
understands that a properly installed and maintained alarm may only reduce the risk of burglary, robbery or fire
without warning, but is not insurance or a guaranty that such event will not occur or that there will be no personal
injury or property loss as a result thereof. Consequently seller shall have no liability for any personal Minjury,
property damage or loss based on a claim that the product fails to give warning. However, if seller is held liable,
whether directly or indirectly, for any loss or damage arising under this limited warranty or otherwise, regardless
of cause or origin, seller's maximum liability shall not exceed the purchase price of the product, Mwhich shall
be complete and exclusive remedy against seller. No employee or representative of Seller is authorized to
change this warranty in any way or grant any other warranty.
WARNING: This product should be tested at least once a week.
CAUTION: risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteriess according to local regulations.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and receiver.
c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
d) Consult the dealer or an experienced radio/TV technician.
FCC ID: JE4RW132KF2
IC: 6564A-RW132KF2
This device complies with FCC rules part 15. Operation is subject to the following two condition:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Warning
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modi -
cations to this equipment. Such modi cations could void the user's authority to operate the equipment.
[France only]:
Déclaration de conformité
Par la présente, RISCO Group déclare que la série Agility des centrales et accessoires a été
conçue conformément aux normes:
RTC 50131-3 ,EN50131-3, Grade 2
EN50130-5, Environmental class II (IP31, IK 06)
EN50131-6, Type C
Organisme de certi cation
AFNOR CERTIFICATION: 11 rue Francis de Pressensé
93571 LA PLAINE SAINT-DENIS Cedex, http://www.marque-nf.com
CNPP Cert: BP 2265, 27950 ST MARCEL, http://www.cnpp.com
Déclaration de Conformité RTTE
Par la présente, RISCO Group déclare que cet accessoire est en conformité avec les conditions
essentielles et à d'autres dispositions appropriées de la directive 1999/5/EC. Pour obtenir la
copie complète de conformité, référez-vous à notre site web : www.riscogroup.com
p
Ce produit répond aux exigences du référentiel de certi cation NF324-H58 pour la
classi cation 2 boucliers, et de la RTC 50131-3.
CHINA
Tel: +86-21-52-39-0066
E N G L I S H
support-cn@riscogroup.com
FRANCE
Introduction
Tel: +33-164-73-28-50
The Agility 2-Way remote control is an 8 button rolling code wireless transmitter designed
support-fr@riscogroup.com
for remote system operation. The remote control is typically used to set (arm), unset (disarm),
POLAND
activate devices and get system status. Being bi-directional enables each command that is
Tel: +48-22-500-28-40
sent to the panel to receive a reply status from the panel and indicate the status to the user
support-pl@riscogroup.com
via the colour LEDs. For higher security, commands can be de ned to be activated with a
4 digit PIN code.
BELGIUM
Check with your installer regarding the de nitions of the remote control.
Tel: +32-2522-7622
support-be@riscogroup.com
Common Operations:
ISRAEL
Operation
Tel: +972-3-963-7777
support@riscogroup.com
Set (Full) (Away Arm)
Set (Partial) (Stay Arm)*
Unset (Full Disarm)
System Status
Output control A/B/C
Panic Alarm
Clear Operation
* For Part Setting with no entry delay press the
Status LED Indications:
Operation
(Send command)
Full Setting (Away)
Part Set (Stay Arm)
Unset (Disarm)
Alarm
st
* If the 1
LED changes to orange it indicates a low battery condition.
Status BUZZER Indications:
Sound
Status
1 beep
Con rmation
3 beep
Error
5 beep
Alarm
For full installation instructions refer to our website www.riscogroup.com
F R A N Ç A I S
Introduction
La télécommande bidirectionnelle de l'Agility est un transmetteur 8 boutons à codes tournants
conçue pour commander le système à distance. Elle est utilisée pour armer, désarmer, activer
des périphériques et obtenir l'état du système. Le fait d'être bidirectionnelle lui permet, pour
chaque exécution de commande envoyée à la centrale, de recevoir un retour sur le statut de
la centrale, et de l'af cher via la couleur des LEDs. Pour une plus grande sécurité, les
commandes peuvent être dé nies pour n'être activées qu'avec un code PIN à 4 chiffres.
Demandez à votre installateur les options de votre télécommande.
Quick
High Security Mode
> Code
> Code
> Code
4\?
4\?
for 2 seconds
for 2 seconds > Code
/
/
/
/
for 2 seconds
for 2 seconds > Code
+
simultaneously for 2 seconds
>
key for two seconds.
st
nd
1
LED*
2
LED*
(Receive Status)
Green
Red
Green
Orange
Green
Green
Green
Flash LED
Fonctions basiques:
Fonction
Rapide
Armement total
Armement partiel*
Désarmement (total)
4\?
Etat du système
Appui long
/
/
Contrôle de sortie A/B/C
Appui long
Alarme panique
+
simultanément pendant 2 secondes
Annuler commande
>
*
Pour l'armement partiel sans délai d'entrée, appuyez sur la touche
LED:
ère
Fonction
1
LED*
(Envoie de commande)
(Réception de l'état)
Armée totalement
Verte
Armée partiellement
Verte
Désarmée
Verte
Alarme
Verte
LED rouges clignotante
* Si la 1ère LED est orange, cela indique une condition de batterie basse pour la télécommande.
BUZZER:
Son
Etat
1 bip
Con rmation
3 bips
Echec commande
5 bips
Alarme
Pour les instructions complètes d'installation, reportez vous à notre site web
www.riscogroup.com
E S P A Ñ O L
Introducción
El mando bidireccional de la Agility es un transmisor vía radio de 8 botones de código
variable ("rolling code") diseñado para manejar el sistema remotamente. El mando
normalmente se usa para armar, desarmar, activar dispositivos y conocer el estado
del sistema. Al ser bidireccional, permite que cada comando que se envía al panel
reciba una respuesta del estado desde el mismo, indicando al usuario dicho estado
por medio de un código de colores del LED. Para mayor seguridad, los comandos se
pueden de nir para tener que activarse con un código PIN de 4 dígitos.
Consulte con su instalador las de niciones del mando.
Operaciones habituales:
Función
Rápido
Armado Total
Armado Parcial
*
Desarmado Total
Séquence avec code
> Code
> Code
> Code
4\?
Appui long
> Code
/
/
Appui long > Code
pendant deux secondes.
ème
2
LED*
Rouge
Orange
Verte
Secuencia con código
> Código
> Código
> Código