Cautions For Use - FireBoard FBX2D Manual Del Usuario

FireBoard FBX2D Device Specifications
Dimensions
Power Input
Power Connector
Measurement Accuracy
Measurement Range
Measurement Resolution
Wireless
Antenna
Encryption Protocols
Weight
Battery Type / Runtime
LCD Display
Probe Ports
Aux Port
Drive Port
LED Status Lights
Operating Temperature
Running on Battery and USB Power
The device is designed to run 24/7 with USB power, or battery power for approx 30 hours on a full charge.
A power and charging cord is included, or any standard USB Type-C charging cable can be used. Charge time
will vary based on battery conditions but can take up to 4-6 hours to completely charge.

Cautions for Use:

Be careful not to get the FireBoard too close to extreme heat - it is rated up to 140°F (60°C). Avoid placing
probes or probe wires over direct flame or extreme heat. The probes are rated for high temperatures, but
grill temperatures can easily run away.
The FireBoard is considered weather-resistant, but not weatherproof or waterproof. The device will hold up
in typical weather conditions, including rain, humidity and heat. However, it doesn't mean that the weather
cannot impact or even damage this device.
4.4"W x 2.8"H x 1.1"D (112mm x 72mm x 28mm)
5VDC-12VDC, USB-C PD (Power Delivery)
USB Type-C
±0.7°F (±0.4°C), ±0.1% of reading
-94 to 752°F (-70 to 400°C)
0.1°
WiFi: 802.11 a/b/g/n & Bluetooth 4.0
Internal
WEP, WPA, WPA2
8 oz (226.8g)
Li-Ion 4000mAh / approx 30 hrs runtime
256 x 128 black and white, backlit
2.5mm phone jack (6x)
8pin Mini DIN
2.5mm Barrel
Multi-Color RGB LEDs
-13 to 140°F (-25 to 60°C)