Sunny Health & Fitness SF-RW5856 Manual Del Usuario página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION! Moving parts, such as the seat, can crush and cut. Keep hands clear of the sliding rail
during use!
17
2
40
1
40
41
1
ADJUSTMENTS GUIDE
ADJUSTING THE RESISTANCE
Rotate the Tension Control Knob (No. 17) clockwise to increase
the level of resistance. Rotate the Tension Control Knob (No. 17)
counter-clockwise to decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level 8
being the highest.
MOVING THE ROWER
To move the rower, lift the Rear Support (No. 5) until the
transportation wheels on the Front Stabilizer (No. 2) touches the
5
ground. Once the wheels are on the ground, you can transport the
rower to the desired location with ease.
ADJUSTING THE BALANCE
If you notice that the rower is unbalanced during use, you should
adjust the foot levelers located beneath the rear support. Rotate
Foot Leveler (No. 35) clockwise until it sits level with the surface
that the rower is on. When you have finished adjusting the foot
leveler, re-tighten the Foot Leveler (No. 35) by rotating it
counter-clockwise. If required, repeat this process to adjust the
other foot leveler.
PEDAL STRAP ADJUSTMENT
The pedal strap is adjustable and can be personalized to fit the
user's foot size.
REPLACE THE BATTERIES
Two AAA batteries are included in Computer (No. 40). To replace
the batteries, remove Computer (No. 40) from Main Frame (No.
1), and disconnect the Trunk Wire (No. 41) and the link wire of
Computer (No. 40). Replace both batteries. Do not mix battery
types and do not mix old and new batteries.
After the replacement, connect Trunk Wire (No. 41) to the link wire
of Computer (No. 40) and put Computer (No. 40) back onto the
Main Frame (No. 1). Dispose or recycle batteries according to your
state and local rules.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido