Gallagher MBS100 Instrucciones página 14

3E4723 Gallagher MBS100 MBS200 MBS400 MBS800 Multi-Power User Manual
Step 2. Connect Earth and Fence
Permanent Installation
Connect the red and green energizer
terminals to the fence and earth stake
using lead-out cable. Attach lead-out
cable to the fence using a joint clamp
(Figure 5).
Portable Installation
Using the leadsets provided:
a) Connect energizer earth (green)
terminal to the earth stake installed
at least 3 ft (1 m) into the ground
(Figure 7).
b) Connect energizer fence (red)
terminal to the fence.
Step 3. Connect the Power
• Ensure energizer switch is set to OFF
before connecting power.
• Ensure the fence is ready to operate.
Battery
Using the supplied battery leadset:
a) Insert battery leadset into the power socket of the energizer.
b) Connect red lead to the (+) terminal of the battery,
c) Connect black lead to the (-) terminal of the battery.
Important: ONLY use a 12 V deep cycle lead acid rechargeable battery.
12
Red
Red
Black
Green
Figure 7