Dr. Schandelmeier MediSafe City Traveller Manual De Instrucciones página 11

instruction manual for child safety seat „city traveller"
GB
group 1 + 2 + 3: for children from 9 - 36 kg
are closest to the top of your child's shoulders. Once the top slots have been reached, you can
continue to use the seat but only until the child's eyes are level with the top of the seat or their
weight exceeds 18kg or over 3 years.
• To adjust the height of the shoulder straps
both harness straps forward to create slack.
• Remove the back lid on the backside of the child seat by pulling out four plastic screws on the
sides of the back lid.
• From behind the seat, unhitch the harness straps
through to the front of the seat. Untie the shoulder pad
front of the seat.
• Thread the shoulder strap
shell. Make sure the straps are not twisted and both straps are at the same height (level with
each other) . Attach the shoulder straps securely to the yoke
7
strap cords.
• Mount the back lid with four plastic screws on the sides of the child seat.
installing the child seat in the car in group 1
• Place the seat on the vehicle seat, ensuring that the backrest
vehicle seat and has not to be bent backward. The backrest must be in the vertical position.
You can adjust the inclination of the backrest by turning the turning knob
• Open the cover of the backrest and turn it up.
• Pull the 3-point belt (lab and shoulder belt) through the belt channel in the rear of the back part.
The shoulder belt goes over the backrest of the seat
• Push the prong of the car belt into the buckle until you hear a click. Tighten the car seat belt in
the direction of the retracting mechanism.
• Then fix the diagonal belt with the red belt clamps which are in the belt channel. Please make
sure the belts are not twisted.
• Turn the cover of the backrest down.
Warning! Make sure that the child seat is properly anchored to the car seat with the 3-point
belt. if it is not, for example because the belt lashes are particularly too long in your car,
then turn the turning knob in a clockwise direction until the child seat is tightly secured.
3
6
back through the correct height slots
R
10
, press the silver harness release lever and pull
R
4
from the yoke
R
cords and pull these through to the
L
.
9
– 10 –
and pull the straps
S 5
in the seat cover and
P
and refasten the shoulder
S
is placed firmly against the
A
.
I
8
.
5