UFESA CE7240 Manual De Instrucciones página 17

B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
INSTRUCTIONS FOR USE
Before use
Make sure that all the product's packaging has been removed.
Before making coffee for the first time, we recommend using the coffee maker twice with water only,
in order to clean the system.
Filling with water
The deposit must be filled with water before turning the appliance on.
Lift the lid
Fill the compartment with cold water.
Fill the tank observing the MAX and MIN levels
Close the lid.
PRE-HEATING
To make a cup of good hot Espresso coffee, we recommend you preheating the appliance before
making coffee, including the funnel, filter and cup, so that the coffee flavour can not be influenced by
the cold parts.
Remove the detachable tank and open the tank cover to fill it with desired water, the water level should
not exceed the "MAX" mark in the tank. Then place the tank into the appliance properly.
Select the one-cup or two–cup mesh, set stainless steel mesh into metal funnel, pull the press bar
backward, make sure the tube on the funnel aligns with groove in the appliance, then insert the funnel
into the appliance from the "Insert" position and release the press bar, and you can fix them into coffee
maker firmly through turn it anticlockwise until it is at the "lock" position. (Fig. 1).
Place an espresso cup on removable shelf.
Then connecting the appliance to power supply source, make sure the steam control knob is on the
"OFF" or "0" position.
Press the "Coffee+ON/OFF" switch, the "Coffee +ON/OFF" indication lamp flashing. Then wait until
the indicator light keeps on. Press the "Coffee/hot water selector", there is water flowing out, close the
pump (pressing coffee/hot water selector button) immediately. The purpose of the step is that pump
the water of the tank into the housing.
When the "Coffee +ON/OFF" indicator light keeps on, you should press the "Coffee/hot water selector"
button, there will be hot water flowing out. When the "Coffee +ON/OFF" indicator light flashing, close
the pump. The pre-heating was finished.
MAKE ESPRESSO COFFEE
Remove the funnel by turning it in clockwise, .Add ground coffee to steel mesh with measuring spoon,
a spoon ground coffee power can make about a cup of top-grade coffee, then press the ground coffee
powder tightly with the tamper.
Set steel mesh into metal funnel, pull the press bar backward, make sure the tube on the funnel aligns
with groove in the appliance, then insert the funnel into the appliance from the "Insert" position and
17