System Setup - Easyconnect FX 1600 garden Instrucciones De Uso

Additional characteristics
¤ SAFETY :
The box is equipped with an automatic fuse, which cuts the circuit
when follow types of malfunction are detected:
• Cable break / short circuit
• Overheating of the system
• Power supply over voltage
• Power consumption is too high
The system restarts after removal or replacement of the faulty
item (a 10 minute delay may be necessary to allow the box to
cool down.)
¤ MEMORY :
The last function used is memorised
When the system is powered up after a long period of inactivity,
or a total power loss, the receiver will automatically start up with
the last used function.
¤ INDENTIFICATION CODE (ID):
Individual identification system
Each box has an integral identification code used for
filtering radio messages. Only the messages with the
correct identification code will be executed. This allows
the use of a multitude of different control boxes each with
individual management without creating conflicts.
¤ AUTOMATIC ACQUISITION:
Allows simple addition/replacement of transmitters
The boxes contain a system, which allows the addition or
replacement of transmitters. The system therefore allows easy
evolution and access to many applications.
notice-2010_66104.indd 12-13
3 – SYSTEM SET UP
Control Box
• Connect the Male connecter (input) to the
power supply and the Female connector
(output) to the lights.
• If the product does not light up, press either the ON/OFF
button or the FUNCTION button.
Remote Control
• Fit the batteries and shut the box.
• Press the ON/OFF and INTENSITY buttons (to get the basic
fixed function.)
• Press on the other FUNCTIONS to vary the light effects.
10/09/2010 09:46:46