Technical Specifications - Trevi X-DJ 13E80 ANC Guia Del Usuario

Auriculares estéreo bluetooth dj de alta fidelidad / con reducción de ruido
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
In the wired state the music playing is controlled by the data output part.

TECHNICAL SPECIFICATIONS

Bluetooth® version:.........................V4.1
Working distance: .............................10m
Bluetooth transmission power: .....2,5mW
Bluetooth transmission: ..................2,4GHz
Frequency response: ........................20Hz - 20KHz
S/N: ......................................................-92dBm
Support: ..............................................HFPV1.6, HSPV1.2, AVRCPV1.0, DIV1.3
Transmit power: ................................4dBm (max)
Speaker driver: ..................................40mm
Sensitivity: ...........................................119±3dB
Impedance: .........................................32Ω±15%
Battery: ...............................................Ricaricabile al Lithio 3,7V, 400mAh
Charging voltage: ..............................5V
Recharging current: ..........................180mA
Weight:
................................................178 gr.
WARNING FOR THE PROPER USE OF RECHARGEABLE BATTERY
- Charge the battery at a temperature between 5°C and 35°C.
- Do not extend the recharge over the indicated time to avoid the risk of overheating and explo-
sion.
- The charging of the battery over the indicated time period or a prolonged period of inactivity can
shorten battery life.
- The rechargeable battery is subject to wear and its capacity gradually decreases.
- To prolong battery life, use it when it is fully charged to fully discharge and then fully charge it
again before using it again.
- Putting in a battery is not depleted, its lifetime will be reduced. In this case, repeat the cycle
charge / discharge fully again.
- Avoid keeping the battery undercharge all night.
INFORMATION NOTE ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: Only high-qualified personnel should perform this operation!
BATTERY REMOVAL
The appliance should not be plugged to the mains socket when performing this operation!
Used batteries should not be disposed of with household waste or thrown into fire or water.
Used batteries should be recycled or disposed of in separate waste collection centres.
To remove the battery:
1. Remove the seat cushion by the R ear cap;
2. Unscrew the screws and open the pavilion;
3. Locate the battery and remove it by unplugging it from the power cables present.
PAG.10
X-DJ 13E80 ANC

Publicidad

Tabla de contenido
loading

Tabla de contenido