Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERIES MUST BE REINTRODUCED INTO KEY WITHIN 3 MINUTES OTHERWISE INTERNAL CLOCK
ATTENTION!
SETTING WILL BE LOST. IN THE LATTER CASE, RESTORE CLOCK SETTING BY SYNCHRONISING WITH
PC SOFTWARE.
Dispose of batteries in accordance with the applicable regulations in the Country.
TEMPERATURE MAX: -20°+50°C
CYLINDER LUBRICATION
Iseo recommends to lubrificate cylinders at least once a year using "RIVOLTA T.R.S. plus" lubricant
Lubrication should only be carried out as shown above:
• clean teeth of key carefully
• place a drop of lubricant on teeth
• insert key into cylinder a few times
ATTENTION!
T h e k e y m u s t b e s t o r e d i n a s e c u r e p l a c e a c c e s s i b l e o n l y t o a u t h o r i z e d p e r s o n s , i n
c a s e o f l o s s o r t h e f t o f t h e k e y , t h e k e y c r e d e n t i a l s m u s t b e i m m e d i a t e l y d i s a b l e d
Product compliance
The product is in compliance with EMC Directives (electromagnetic compatibility).
The products marked with EX Logo are certified by ICIM notified institute nr.0425 in accordance with ATEX directives with following
classification: Ex II 2 G Ex ib IIB T4
II = Group of equipment II. Comprises equipment intended for use in places likely to become endangered by explosive atmospheres.
2 = Level of protection: comprises products designed to remain within their operational parameters, stated by the manu
facturer, and based on a high level of protection for their intended use, in areas in which explosive atmospheres caused by mixtures of
air and gases, vapors, mists or air/dust mixtures are likely to occur
G = Type of explosive atmosphere: gas vapors
Ex = Explosion protections
ib = intrinsic safety of the product (EN 60079-11)
IIB = Group of gas (Ethylene)
T4 = Temperature class 135°C (not to be confused with the declared maximum operating temperature 50°C)
KW13222.EX.ING
CSF
iseo.com
Publicidad
