Logging Into The "Security" Drive; Changing Drive Sizes - Siemens Fujitsu STORAGEBIRD Solo 25-UP Manual De Instrucciones

Logging into the "security" drive

► Connect the device to the computer via the USB port.
The "AP" and "public" drives are available in Windows Explorer.
► Open the "AP" drive.
► Start the fingerverify.exe application.
The fingerprint verification dialogue will be displayed.
► Run your registered finger over the fingerprint sensor.
A green circle confirms successful registration.
The dialogue closes, the "AP" drive is replaced by the "security" drive.
Your encrypted data is available.
or
A red cross means that an error has occurred.
► Run your finger over the sensor again.
After several unsuccessful attempts you must enter the password
which you assigned at registration.

Changing drive sizes

► Connect the device to the computer via the USB port.
► Place the "STORAGEBIRD Solo 25-UP" CD in your computer drive.
► Start the initial.exe programme.
The dialogue for setting the public region and the security region will appear on the screen.
► Slide the control to the required position.
► Click on START to confirm.
A26381-F103-Z104-1-8N19, edition 1
STORAGEBIRD
English - 7