Andis BTF3 Instrucciones De Uso Y Cuidado página 4

FIGURE A
FIGURE D
each overseas location before using the appliance. For connection to a
240-V supply, use an attachment plug adapter of the proper configuration
for the power supply receptacle. Note that the trimmer ON/OFF switch
must be in the OFF position for the battery to charge. Plug the adapter
cord directly into the bottom of the trimmer (Figure A). The green light on
the trimmer will turn on.
The trimmer has not been charged at the factory. Please charge the trimmer
for 2 hours before the first use for maximum performance. You can keep
the trimmer plugged into the adapter when not in use. The adapter will
maintain the battery at full charge and the green light will stay on. However,
we recommend that the adapter be unplugged if the trimmer won't be used
for seven or more days.
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance
you know is working).
2. Check to make sure adapter cord is plugged firmly into trimmer. Twist the
adapter connector slightly to insure good electrical connection. If failure
to charge still exists, return trimmer to Andis or an Andis Authorized
Service Station for examination and repair or replacement.
4
FIGURE B
FIGURE E
FIGURE C
OIL
FIGURE F