Programming; Access Administrator And User Menu - Fermax VEO WIFI DDA 4,3 DUOX PLUS Manual De Instalador

Led Connectivity (wifi).
See Operation chapter: Pairing. Call forwarding.
On the monitor:
- Intermittent fast blinking. The white WIFI LED on the monitor will start flashing when
the application and the monitor begin to synchronize with each other.
- On. The monitor's white WIFI led remains lit when the new linked home is shown as
available and connected.
- Intermittent slow blinking. If a call is accepted in the application, the monitor will remain
locked and will show the WIFI LED flashing once per second.
On the monitor screen:
Message of confirmation in the monitor pairing process.
Error message in the monitor pairing process.
ERROR
Wifi signal strength icon displayed in the menu: Shows 5 levels between 0% and 100%:
Signal strength between 0% and 20% or unpaired monitor.
Signal strength between 20% and 40%.
Signal strength between 40% and 60%.
Signal strength between 60% and 80%.
Signal strength between 80% and 100%.

PROGRAMMING:

1. PROGRAMMING: ACCESS ADMINISTRATOR AND USER MENU
Screen: ADMINISTRATOR menu
Do Not Disturb icons (Screen: User Menu) and Image Capture (User Menu Screen. User
Settings option) will change depending on whether they are enabled/disabled. If they
are enabled, a green tick will be displayed
whereas if it is disabled you will see a red cross
10
DUOX PLUS WIFI VEO MONITOR
F2
_ _ : _ _
_ _ : _ _
Screen: USER Menu
in the top right-hand corner of the icon,
.