Tools Required - Garden Wood Furniture Newport 972KFBA Instrucciones De Armado

972KFBA Newport Side Table — Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
A – Top Assembly – Qty. 1
B – Lower Base – Qty. 1
C – Upper Base – Qty. 1
D – Leg– Qty. 4
ASSEMBLY INSTRUCTIONS
B
C
Fig. 1
1. Spread a thin layer of glue in the grooves in the Upper and Lower Bases (C & B).
See Figure 1. Insert two 4x35mm Phillips Head Screws (J) into the middle holes and
attach. Quickly wipe up any excess glue with a damp rag. See Figure 1a. Insert
Levelers (M) into base. See Figure 1b.
Page 2 – 972KFBA – 09/08
F –8x70mm Hex Bolt – Qty. 4
G –Barrel Nut – Qty. 4
J – 4x35mm Phillips Head

TOOLS REQUIRED:

Hex Wrench (provided), Wrench (provided), Mallet or Padded Hammer,
Phillips Screwdriver, Slotted Screwdriver, Outdoor Wood Glue
HARDWARE
H – Nut – Qty. 8
I – Washer – Qty. 8
Screw– Qty. 2
M
J
M
Fig. 1a
K –Hex Wrench – Qty. 1
L – Wrench – Qty. 1
M – Leveler – Qty. 4
M
M
M
Fig. 1b