Assembly; Specifications; Operation; Maintenance And Servicing - Denios PolySafe-Depot PSR 8.8 Manual De Instrucciones

5. Assembly

Position the PolySafe Depot at ground level and check that it is standing securely, adjusting if necessary.
Outside the storage system may only be positioned so that it can withstand the wind.
If necessary anchor the PolySafe Depot with the wall of the building (see drawing). The fixing elements are
included in the delivery. Please check the suitability of the fixing elements for the wall.
In order to make it easier to load the storage system or to store and dispense, the accessories available as
an optional extra should be used.

6. Specifications

See type label

7. Operation

After opening the jalousie, containers can be stored in the PolySafe Depot using suitable tools.
Check that the containers stored in it are standing securely and secure them from falling over or down!
It is possible to dispense safely in the depot.
Do not transport when filled.
The PolySafe Depot must not be exposed to direct sunlight or high temperatures for long periods of time
as otherwise this may lead to a reduction in inherent stability and resistance in the material.

8. Maintenance and servicing

The checking and maintenance has to adhere to and be carried out in accordance with the instructions of the
General User Manual which is attached.
The condition of the grids, jalousie with guide rails and sump has to be checked at regular intervals.
Check the screw connections are fixed securely.
If necessary grease the locking cylinders with graphite.
When exchanging parts use only original replacement parts from the manufacturer!
PolySafe-Depot PSR 8.8
172541 / 172539
Detail A
A
Seite 7 von 12 Seiten Ausgabe 10/2008