4. 9.2 UnitS – Unit exchange
When it displays UnitS, press TARE to enter and press SET/0-9 to choose and then press
TARE to confirm and exit.
Units: H9 (kg), PcS (counting), Lb.Lb (lb), Lb.oZ (lb.oz), g (g).
Counting Operation:
4.9.2.1.
4.9.2.2
4.9.2.3
4. 9.3 A-oFF – auto power off
When it displays A-oFF, press TARE to enter and press SET/0-9 to choose n o Y, and
press TARE to confirm. n=NO, Y=Yes (10 minutes in zero, it will auto off).
4. 9.4 FILt – display filter
When it displays FILtX (FILt1 means one step to change display, FILt2 means 3-4 steps to
change display, FILt3 means 6-8 steps to change display). Press SET/0-9 to change,
and press TARE to confirm and exit.
4. 9.5 ZEro – auto zero range
When it displays ZEro, press TARE, it will show ZEro x.x (x.x is the range: 0.5d, 1d, 1.5d, 2d,
2.5d, 3d, 3.5d, 4d, 4.5d, 5d. d is the division value when n=3000). Press SET/0-9 to
choose and press TARE to confirm and exit.
4. 9.6 BuZZEr – buzzer set
When it displays BuZZEr, press TARE to enter and press SET/0-9 to choose on o oFF, and
press TARE to confirm and exit.
4. 9.7 d – change division value
When it displays d, press TARE to enter and press SET/0-9 to choose the display division
(1g/2g/5g/10g), press TARE to confirm and exit.
4. 9.8 d-dP – choose single or dual display
When it displays d-dP, press TARE to enter and press SET/0-9 to choose n or Y, press
TARE to confirm and exit.
n = single display; Y = dual display
4.10. LED brightness
After power on, long pressing ON/ZERO, it displays Lc-, press SET/0-9 to choose Lu-0, Lu-1,
Lu-2 or Lu-3, press TARE to confirm and exit.
WSS/SUPER USER MANUAL
and exit
3. when buzzer set = on, it will beep when the weight within range of OK.
When it displays PcS, press TARE, now pcs led on.
Sampling: Longtime press ON/ZERO, it displays count and then 0, then put
the sample and press TARE, then press SET/0-9 and TARE to input the
quantity of samples, after finish, it displays PcS and pcs led turns on.
Exit: change the unit.
Caution: Max.quantity <30000.
4