Metra 95-7353CH Guia De Instalacion

Kia Rio, Rio5 2012-2015
KIT FEATURES
• ISO DDIN radio provision
• Painted Charcoal
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets • C) Start/Stop switch blank plate
• D) Airbag light blank plate • E) (5) #8 x 3/8" Phillips truss-head screws
A B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304
Antenna Adapter: • Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket wrench
METRA. The World's best kits.
Installation instructions for part 95-7353CH
95-7353CH
C D
™ metraonline.com
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 3
Kit Assembly
– ISO DDIN radio provision ...................................... 3
E
CAUTION!
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
Table of Contents
Metra recommends disconnecting the negative bat -
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION