Wolf SW 24 Manual Del Usuario página 11

WOLF SW 24: CONTROL BOARD FOR SWING GATES
6. - We will perform the closing maneuver by pressing "BUTTON 2" of the remote so that the
slave door begins to close. Wait for a time and press "BUTTON 1", the master door will begin
to close
7. - Press again the "BUTTON 2" to start the soft stop in slave door, and press "BUTTON 2" to
start soft stop is master door. (This function only works if the "SOFT STOP" option is activated
(option 7).
8. - Press the "BUTTON 2" again to finish the closing maneuver in the slave door and press
"BUTTON 1" to finish the master door closing maneuver
If you use only one motor, make the programming process with gate 1 button.
This option will be done by recording on the channel 1 of the RX MULTI a button different
from the one selected to open the door. Each time we press this button we will open or
close only the master door. If both doors are open, this option does not work.
Tabla 1: Selección de Marcas
ITEM SELECTION DIP
1 2 3 4 5 6 7 8
1
1 2 3 4 5 6 7 8
2
1 2 3 4 5 6 7 8
3
PEDESTRIAN OPTION
Table 1: Brand Selection
BRAND/MARCA
NICE FLORS
MARANTEC
Universal
Fixed Code
Código Fijo
11
FREQ ORIGINAL
433.92
MHz
433.92
MHz
433.92
Fixed Code
MHz