Publicidad
Idiomas disponibles
Idiomas disponibles
VOICE - User manual
(A) 12VCC: Connection to external power supply adap-
tor.
(B) COM: Connection to display (telephone socket -
standard);
(C) VOLUME: Keys + and – to regulate volume with
vocal level indication;
(D) OUT B.F.: Connection to an external amplifier;
(E) OUT: Connection to the loudspeaker;
NOTE: under the red carter there is a dip-switch to
set additional messages (scheme MESSAGES);
ATTENTION: Read this manual before using the product.
The VOICE module is composed by a main unit and a
loudspeaker. An external power supply and cables are
provided for connection to the loudspeaker and the
display. Once these units have been correctly connec-
ted (scheme INSTALLATION), at each call, the VOICE
announce the number shown on the display (female
voice). The system is also able to link each progressive
number to a series of information available by default.
For further details see the scheme MESSAGES.
The product is also capable of memorising a message of
the customer's choice, which must be sent to the unit
using dedicated software (V-SOFTWARE). This message
may announce special offers, welcome, good wishes,
musical, etc., and must be made in MP3 digital format,
not exceeding the available memory fixed at approx.
400 Kbytes.
Scheme INSTALLATION - Plug the telephone socket of
the display to the COM (B) of the VOICE by telephone
cable in the kit. After, connect the loudspeaker to the OUT
socket (E) of the VOICE. Finally plug display and VOICE
(A) to power supply. If the connection was made correc-
tly you'll hear "TEST AUDIO OK". Now the system is ready
to use. Reading the scheme MESSAGES it's possible to
personalize the message with the following indications:
Grocery
Delicatessen
Salami and Cheese
Fish
Bakery
Confectionary
Butchers
Pastry
e n g l i s h
Cod. 101
Cod. 102
Cod. 103
Cod. 104
Cod. 105
Cod. 106
Cod. 107
Cod. 108
Publicidad
