W 560
Perfect Spray spray attachment incl. 800 ml. conainer
For a rapid paint change. For medium- and large-scale objects and
furniture.
Small-scale spray attachment incl. 250 ml container
For filigree objects, detailed and creative work.
Perfect Spray spray attachment incl. 1400 ml container
Rapid working at larger objects such as timber houses, garage doors, etc.
Detail / Radiator spray attachment incl. 600 ml container
For inaccessible places, such as radiators, cupboard corners, recesses etc.
Further information about the WAGNER range of products for renovating is
available under www.wagner-group.com
Correction of Malfunctions
Problem
No coating material
emerges from the
nozzle
Coating material drips
from the nozzle
Atomisation too coarse
Spray jet pulsates
Coating material causes
"paint tears"
Too much fog of
coating material
(Overspray)
Paint in the ventilating
hose
Accessories (not included in the delivery)
Cause
Nozzle clogged
Feed tube clogged
Material volume setting turned too far
to the left (-)
Feed tube loose
No pressure build-up in container
Nozzle loose
Nozzle worn
Nozzle seal worn
Coating material assembly at air cap,
nozzle or needle
Viscosity of coating material too high
Material volume too large
Material volume adjusting screw turned
too far to the right (+)
Nozzle contaminated
Air filter heavily soiled
Too little pressure build-up in container
Coating material in container running
out
Air filter heavily soiled
Too much coating material applied.
Distance to the object too large
Too much coating material applied
Diaphragm soiled
Diaphragm defective
2314 492
2314 500
2314 494
2314 496
Remedy
Clean
Clean
Turn to the right (+)
Insert
Tighten container
Tighten
Change
Change
Clean
Thin
Turn material volume adjusting
screw to the left (-)
Clean
Change
Tighten container
Refill
Change
Turn material volume adjusting
screw to the left (-)
Reduce distance
Turn material volume adjusting
screw to the left (-)
Clean the diaphragm
Replace the diaphragm
GB
29