Recommendations For Use - Hilti DSH 700-X Manual De Instrucciones Original

3.1.2 Saw trolley (accessory)
3.2 Intended use
The product described is a gasoline-powered cut-off saw for the wet or dry cutting of asphalt, mineral
construction materials or metals using diamond cutting discs or abrasive cutting discs. It can be held and
guided by hand or mounted on a saw trolley.
3.3

Recommendations for use

• Use of the wet cutting method is preferable in order to reduce the amount of dust produced when cutting.
By using the self-priming water pump (accessory) you can work without need for a water supply hose.
The water can be drawn, for example, directly from a container.
• Do not cut right through the workpiece in one pass. Move the saw back and forward several times until
it gradually reaches the desired cutting depth.
• To avoid damaging the diamond cutting disc when dry cutting, lift the disc out of the cut for approx. 10
seconds every 30 to 60 seconds while the saw is still running.
• Resharpen a polished diamond disc (i.e. when no diamonds project from the segment matrix) by cutting
with the disc in a very abrasive material such as sandstone.
• For extensive floor sawing applications, mount the saw on the trolley (accessory).
3.4 Cutting disc specifications
Diamond cutting discs in accordance with ANSI B7.1 are to be used with the product. Synthetic resin-
bonded, fiber-reinforced cutting discs in accordance with ANSI B7.1 (straight, not dish-shaped, type cutting-
off wheel) may also be used with the product for working on metals.
The disc mounting instructions and instructions for use issued by the cutting disc manufacturer must be
observed.
3.5 Items supplied
Gasoline-powered saw, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.6 Consumables and wearing parts
• Air filter
• Cord
• Starter
• Fuel filter
• Spark plug
*2271385*
2
@
;
=
%
&
(
)
+
§
2271385
Grip
Throttle trigger
Cutting depth adjustment
Hold-down device
Water tank
Water connection
Axial adjustment
Throttle cable
Machine cradle
English 7