Manufacturer's Warranty; Mode D'eMploi Original; Indications Relatives À La Documentation; Explication Des Symboles - Hilti DSH 700-X Manual De Instrucciones Original

and other services and adjustments necessary for required maintenance at and after this first scheduled
replacement point. Except as set forth above, the warranty terms set forth in section 12 below, apply.
11.2

Manufacturer's warranty

Hilti warrants that it will repair or replace any part containing a defect in material and workmanship for 20
years from the original sale date. This warranty is valid so long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with the Hilti Operating Instructions, and the technical
system is maintained. This means that only original Hilti consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or replacement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless stringent national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inability to use the tool for any purpose. Implied
warranties of merchantability or fitness for a particular purpose are specifically excluded.
For repair or replacement, contact Hilti immediately upon discovery of the defect at:
In the USA:
800.879.8000
Hilti Inc.
7250 Dallas Parkway, Suite 1000
Plano, TX 75024
CS.InboundUS@hilti.com
In Canada:
800.343.4458
Hilti (Canada) Corporation
2360 Meadowpine Blvd
Mississauga, ON L5N 6S2
CanadaSalesSupport.English@hilti.com
CanadaSalesSupport.French@hilti.com
This constitutes Hilti's entire obligation with regard to warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning warranties.

Mode d'emploi original

1 Indications relatives à la documentation
1.1 À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
1.2

Explication des symboles

1.2.1

Avertissements

Les avertissements attirent l'attention sur des dangers liés à l'utilisation du produit.
signalisation suivants sont utilisés :
DANGER
DANGER !
▶ Pour un danger imminent qui peut entraîner de graves blessures corporelles ou la mort.
*2271385*
2271385
Les termes de
Français 21