Making The Electrical Connections - HAMPTON BAY HOLLY SPRINGS 57264 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
3

Making the electrical connections

WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
WARNING: Remove the rubber motor stops on the bottom of the
fan before installing the blades or testing the motor.
IMPORTANT: Use the plastic wire connectors (FF) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 54 in. lead wires for use with an
extended ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.).
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (C). If you do not wish to cut the wires,
you will need to neatly wrap them.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (FF).
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (FF).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (FF).
□
Secure each wire connecting nut (FF) using electrical tape.
□
Turn the wire connecting nuts (FF) upward and push the
wiring into the outlet box (KK).
White
Black
9
Please contact 1-855-HD-HAMPTON for further assistance.
Outlet box
in the ceiling (KK)
Green or bare wire
Blue
Green
HAMPTONBAY.COM