Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWARE NEEDED
14
1/4-20 x 2" Hex Head Bolt
(Qty. 2)
22. Repeat steps from 1-17 on second half then continue on Step 23.
23. Attach linkages #4 to the OUTSIDE of U-support #7 on
second table half. Use Bolts #14, plastic washers #24
and hex nuts #15. See Figure 8.
NOTE: Tighten locknuts #15 finger tight
only. They will be removed when the
two table top halves are connected.
Plastic Washer
24
(Qty. 2)
¼" Locknut
15
(Qty. 2)
7
24
14
NOTE: Tighten locknuts #15 finger tight
only. They will be removed when the two
15
table top halves are connected.
Second Table Top
Figure 8
12
CAUTION:
AT LEAST TWO ADULTS ARE NEEDED TO
MOVE TABLE HALF!
24
15
14
4
Publicidad
