De Dietrich DTV302 Serie Guía De Utilización Y De Instalación página 14

99627111_ML.qxd 07/01/03
Connection
These hobs are delivered with type H 05 VVF power cable (1.5mm²) with 3/5 conductors (including a
green/yellow earth wire), which must be connected to the power supply via a plug that complies with
publication CEI 83 or an all-pole cut-out unit with contacts that open by at least 3mm.
If the cable is damaged, it must be replaced by the manufacturers, their After Sales Service or another
similarly qualified person for avoiding any possible risk of accident.
When connected to 400 V2N three-phase, if you hob malfunctions, check that the neutral cable is
properly connected.
The unit must be installed so that the mains plug is easily accessible.
- 230 V monophase
Connect the 3 wires as per the following
colour code.
Blue
L
N
You must use a 16 Amp
fuse on your installation
15:56 Page 14
Installing your hob in complete safety
Green/yellow
Black
Total energy consumption:
14
230 V∼ ∼ 50 Hz
DTV302.......1,5 kW