Polaris 3900 Instrucciones De Instalación página 4

Page 4
ENGLISH
15. Remove the hubcap from the single side wheel
using the flathead screwdriver and set aside.
Figure 14. Cleaner disassembled
Install the Tune Up Kit
1. Remove tune up kit from the box.
2. Loosen the three (3) screws from underside of the
Tune Up Kit (Figure 15). Tilt cleaner over and
allow screws to drop out.
1
Figure 15. Remove three (3) screws
Polaris 3900 Tune Up Kit
®
2
3
|
Installation Instructions
3. Remove the bottom housing (Figure 16).
Figure 16. Tune up kit bottom housing removed
4. Slide the top housing over feed pipe
(Figure 17).
Figure 17. Slide top housing over feed pipe
5. Set the Tune Up Kit on its side and replace
two (2) screws to secure the top housing
(Figure 18).
Deeply
Recessed
Screw
1
Figure 18. Replace two (2) top housing screws
2