Dmx Linking - Chauvet Professional SYNAPSE4 Guía De Referencia Rápida

Synapse 4 QRG
AC Power
AC Plug
Resetting The
Breaker

DMX Linking

DMX Connection
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
This product is equipped with resettable circuit breakers. Each section has its own
20 A circuit breaker that runs through the 20 A main breaker. If the main breaker
trips, all sections of this product will lose power.
1. Disconnect the product from power.
2. Allow the product to cool for 15 minutes.
3. After 15 minutes, try to reset the breaker by pressing the button until it latches
in the operation position.
4. Connect the product to power and continue using as recommended.
Disconnect this product from the power outlet before resetting the breaker. If
the breaker does not reset (the breaker button will not remain inserted),
contact Chauvet immediately. This indicates a possible internal malfunction.
The Synapse 4 will work with a DMX controller using a 5-pin DMX serial
connection. A DMX Primer is available from www.chauvetprofessional.com.
The Synapse 4 uses a 5-pin DMX data connection for its DMX personalities: 1CH
and 4CH. See the User Manual for information about connecting and configuring
the product for DMX operation.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Screw Color
Brown Yellow/Brass
Blue Silver
Green
EN