Installing Your New Appliance; Ventilation Of Appliance - Fagor BMF-300X Manual Del Instalacion

Installing your New Appliance

Before using the appliance for the fi rst time,
review the following tips.

Ventilation of Appliance

To ensure the proper working conditions,
air must be allowed to circulate behind and
above the refrigerator. Leave at least 25/64
inch (10 mm) of space between the back
wall and the refrigerator condenser, and at
least 25/64 inch (10 mm) between the top
of the refrigerator and the cabinet or ceiling
above it. Leave at least 19/64 inch (7.5 mm)
of space between each side and a clear
space in front to allow the doors to open
135°.
Dimensions of the appliance with door
(Height x Width x Depth): 72.83" x 23.42"
x 26.9".
Dimensions of the appliance without door
(Height x Width x Depth): 71.53" x 23.42"
x 23.03".
A
Note:
• This refrigerator can be inserted into a
kitchen cabinet. The space must have
the following minimum
shown in the fi gure above.
"A" : 24 1/64" (610mm)
"B" : 79 17/32" (2020mm)
"C" : 23 27/64" (595mm)
23 27/64" Min. clearance
for door swing.
Minimum installation clearance
Top: 25/64 inch (10 mm)
Back: 25/64 inch (10 mm)
Left Side: 19/64 inch (7.5 mm)
Right Side: 19/64 inch (7.5 mm)
dimensions
25/64" Min.
clearance from
the cabinet
Top of Refrigerator
90° Swing
required for
pull-out shelf
clearance.
3
19/64" Min.
clearance from
a corner to
achieve 90°
door swing.