Publicidad
Idiomas disponibles
Idiomas disponibles
13. Unscrew the upper hinge axis, turn the
upper hinge over and fi x axis on it. Then
place it aside for later use.
14. Reconnect the wires on the left and right
slots of the refrigerator body.
15. Place the door in the correct position.
Move the ground wire into the slot on
the upper door from right to left and then
fasten the upper hinge and ground wire
with the self-tapping screws. Hold door
in place when installing.
16. Install the upper hinge cover (in plastic
bag) and reconnect any remaining wires.
17. Turn the corner cover of the door 180°
and install it onto the right corner of the
upper door, then mount the upper cover
of the upper door.
18. Take the connector out of the cover and
mount it on the spare cover (found in
spare parts bag, marked with an R). Put
the cover you just removed in the parts
bag.
Note: Be sure the front side of the
connector fi ts correctly when mounting.
19. Install the corner cover, connect the wire
and install the upper cover of the upper
door.
20. Open the upper door, mount door racks
and then securely close the door.
7
Publicidad
