allen+roth 813416 Manual Del Usuario página 5

3.
Place chair base (C) on a soft, clean surface. Put chair
set (B) on the top of base (C), making sure the arrows
are pointed at same direction in front of the chair. Put
metal plate on fiberglass spring, then guide the bolts
through the holes on the metal plate, fiberglass spring
and base (C). Fasten them together with 6 bolts (AA), 6
large wide washers (EE), 6 lock washers (FF) and 6
nuts (GG).
Hardware Used
M8 50
Bolt
8 24 Large Wide Washer
8 Lock Washer
M8
Nut
4.
After final alignment, tighten all bolts and screws carefully.
Use the adjustable feet to level the chair.
3
Metal Plate
Fiberglass
Spring
Front
Front Leg
6
6
6
6
4
5
Connecting Bar
Back Leg