Assembling The Linde Warning Projector - Linde Warnprojektor 45 Instrucciones Originales

3
Assembly

Assembling the Linde warning projector

Assembling the Linde warning
projector
WARNING
Risk of injury due to insecure mounting.
 Mount the warning projector on constructions
that can bear four times the weight of the device.
 Use suitable mounting material.
 Unscrew four screws (1) along with spring
washers (2) and release the mounting plate
(3).
 Remove the mounting plate.
 Attach the mounting plate in the required lo-
cation. Use appropriate mounting material
to do so.
 Insert the warning projector into the mount-
ing plate (1) and secure using four screws
(2) and spring washers (3).
Tightening torque: 3.0...4.5 Nm
8
3
1 Socket head screw M6x20 mm
2 Spring washer M6
3 Mounting plate
1
Operating Instructions – 3008011680 EN – 06/2018
2 1
LWP_03
3 2
LWP_04