Error Signals - Hammerhead HLMT130 Manual Del Usuario

OPERATION
f. Press the measure button

ERROR SIGNALS

The following error signals may appear on the LCD display of your tool:
CODE EXPLANATIONS
The reflected laser signals are
Er001
too strong.
Er002 Out of range.
The target provides poor
Er003
reflection of the laser.
Er004 The temperature is too high.
Er005 The temperature is too low.
Er006 Low battery.
Strong vibration; you moved
Er007 the tool too abruptly when
measuring.
COMPACT LASER MEASURING TOOL
again to make a new measurement.
ACTION
Do not direct the laser at a
highly reflective surface; cover
the surface with white paper if
necessary.
Take measurements within the
range of 1-130 feet
(0.2 to 40 m).
Change the measuring target
or cover it with a piece of white
paper.
Wait until the compact laser
measuring tool has reached the
operating temperature.
Wait until the compact laser
measuring tool has reached the
operating temperature.
Charge the battery.
Always keep the tool steady.
15