KTM Power Parts 93012955044 Manual De Instrucciones página 10

Fork as of model year 2017
Preliminary work
- Raise the motorcycle with a work stand (see Repair Manual).
- Strap the rear part down.
- Remove the front fender (see Repair Manual).
- Remove the fork legs (see repair manual).
Disassembling the fork legs
NOTE
The operations are the same on both fork legs.
- Clamp the fork leg in the area of the lower triple clamp.
Clamping stand T612S
- Loosen screw cap .

NOTE
The screw cap cannot be removed yet.
- Unclamp the fork legs.
- Drain the fork oil.
- Clamp the fork leg with the fork shoe.
Use soft jaws
- Remove screw with washer.

NOTE
Place a collecting container underneath as some oil will usually still
run out.
- Remove the cartridge.
10