Valley 82842 Instrucciones De Instalación

04/07/2010
Rev. 3
APPLICATION:
WARNING: Although this hitch is designed to safely tow its rated load, we recommend that you consult your vehicle owner's manual for
possible manufacturer's recommendations or limitations. Trailer brakes are recommended for towing loads in excess of 1500 lbs. Always follow the
manufacturer's installation instructions and always install on the specified vehicle. Before installing hitch, check that the attachment points are in good
condition.
Failure to follow these guidelines will void warranty. Any modifications to this hitch will void warranty.
WARNING: Use only a 5/8" diameter hitch pin with locking device to secure a ball mount in this receiver. Be sure to check the hitch pin and hair pin
for positive locking placement before towing trailer.
NOTE: Some states require a clear view of license plates. Remove trailer ball and/or ball mount when not in use if it restricts view.
COMPLETE PARTS LIST
Item Part #
1. 772011 Receiver Assembly
HARDWARE KIT #331804
2. 369804 14mm x 2.0 x 45mm Hex Bolts 10.9
3. 190000 9/16" Flatwasher
4. 370105 9/16" Lockwasher
5. 191303 M14 x 20 Hex Nut
6. 288302 Spacer Plate
1. Position receiver assembly #1 up against the rear and inner surface of each truck side frame.
2. Line up holes in receiver frame brackets with existing holes in truck frame and bolt in place with fasteners supplied
with hitch. Be sure that the spacer plates #6 are placed between the end of the truck frame and the hitch frame
bracket tab at each attachment point.
3. Tighten all 14mm attachment bolts to 140-150 ft. lbs. torque. Failure to tighten bolts as described may result in
fastener loss or failure.
For latest vehicle applications and years covered or for information regarding the installation of this product, go
to: www.vtowing.com or Email us at: techsupport@vtowing.com or Call our Technical Support Team at: 1-800-344-3230
This product complies with regulation V-5, C.S.A Standard D-264 and safety requirements for connecting devices
INSTALLATION INSTRUCTIONS
MODEL NO. 82842
Ford F-150 P/U
Description Quantity
and towing systems of the State of New York
Lincoln Mark LT
1
4
8
4
4
2
Hardware Kit #331804
CLASS V
WEIGHT CARRYING HITCH CAPACITY
6,000 LBS. MAXIMUM TRAILER WEIGHT
600 LBS. MAXIMUM TONGUE WEIGHT
WEIGHT DISTRIBUTING HITCH CAPACITY
12,000 LBS. MAXIMUM TRAILER WEIGHT
1,200 LBS. MAXIMUM TONGUE WEIGHT
82842